236. Sawai, K., Doi, M., Ishii, N., Nakai, H., Morimoto, T., Dynamic Analysis of Swing Piston Rotary Compressor, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.33, No.2, pp.93-104, (2016).
235. Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T., Method for Identifying Dynamic Instability of Tainter Gates, Hydro Review Worldwide The Magazine of North American Hydroelectric Industry), ISSN 0884-0385, Vol.35, No. 6, pp.72-80, PennWell Corporation, Oklahoma, USA, (July 2016; re-publication of Article 222)
234. Ishii, N., Tsuji, T., Nonoguchi, E., Anami, K., Terada, Y., Morimoto, T., Knisely, C.W., Empirical Calculation Method for Bypass leakage in Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1499, (July 11-14, 2016).
233. Ishii, N., Nonoguchi, E., Anami, K., Sakuda, Y., Terada, Y., Imai, Y., Sawai, K., Knisely, C.W., Lubrication Tests to Support Optimal Performance Design Guidelines for Thrust Slide-Bearing in Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1497, (July 11-14, 2016).
232. Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T., Effect of Upstream Submergence on In-Water Natural Vibration Mode of a Tainter Gate, In: Flow Induced Vibration and Noise (eds: Gonzales Diez, N., et. al.)Proceedings of the 11th Conference on Flow-Induced Vibration and Noise, pp.665-669, ISBN: 978-90-9029803-0, (July 2016).
231. Anami, K., Ishii, N., Knisely, C.W., Dynamic Stability Identification of a Full-Scale Tainter-Gate and Extension of Gate-Opening Range for Operation, Proceedings of ASME Pressure Vessels and Piping Conference (online), PVP2015-45418, Boston, MA, USA, (July 2015).
230. Anami, K., Ishii, N., Knisely, C.W., Theory of Coupled-Mode Self-Excited Vibration of Tainter Gates, Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, International Vol.3, No.4, pp.687-707, Hyderabad, India; http://www.ijmerr.com/index.php?m=content&c=index&a=lists&catid=9, (Oct. 2014).
229. Ishii, N., Anami, K., Knisely, C.W., Retrospective Consideration of A Plausible Vibration Mechanism for the Failure of the Folsom Dam Tainter Gate, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, Vol.3, No.4, pp.314-345, Hyderabad, India; http://www.ijmerr.com/index.php?m=content&c=index&a=lists&catid=9, (Oct. 2014).
228. Anami, K., Ishii, N., Knisely, C.W., Field Test Validation of Analytical Model for Vibration Characteristics of a Flap Gate undergoing Self-Excited Vibration, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, Vol.3, No.4, pp.1-15, Hyderabad, India; http://www.ijmerr.com/index.php?m=content&c=index&a=lists&catid=9, (Oct. 2014).
227. Anami, K., Ishii, N., Analogy between Gate Failure and Bridge Failure, Proceedings of the 1st International Conference on Engineering, Science, Technology, Education and History, pp.17-25 (Keynote speech), Thimphu, Kingdam of Bhutan, (August 2014).
226. K., Ishii, N., Oku, T., Knisely, C.W., Tsuji, T., Measurement of nstantaneous Flow-Rate Coefficients and FIV Characteristics of Tainter Gates ta Large Openings, Proceedings of ASME Pressure Vessels and Piping Division Conference (CD-ROM) PVP2014-28654, Anaheim, CA, USA, (July 2014).
225. Ishii, N., Tsuji, T., Anami, K., Knisely, C.W., Kurihara, K., Oku, T., Sawai, K., Yoshida, H., Nakai, H., Optimization of EHL performance in Thrust Slide-Bearing of Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1565, (July 14-17, 2014).
224. Ishii, N., Tsuji, T., Anami, K., Knisely, C.W., Oku, T., Nokiyama, K., Sawai, K., Yoshida, H., Nakai, H., Hydrodynamic-Pressure-Induced Elastic Deformation of Thrust Slide Bearing in Scroll Compressors and Oil Film Pressure Increase due to Oil Envelopment, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1562, (July 14-17, 2014).
223. Tsuji, T., Ishii, N., Oku, T., Anami, K., Knisely, C.W., Nokiyama, K., Sawai, K., Morimoto, T. & Sakuta, A Study of Elasto-Hydrodynamic Lubrication Effect for Thrust-Slide bearings of Scroll Compressors (1st Report: Verification of Elastic Deformation by FEM Analysis and Experiments, and Oil Film Pressure Increase due to Oil Envelopment), Transactions of Japan Society of Mechanical Engineers, Series C, Vol. 79, No. 807, pp.4411-4423, (Nov. 2013).
222. Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T., Method for Identifying Dynamic Instability of Tainter Gates, Hydro Review Worldwide, Vol.21, No. 6, November-December 2013, pp.34-39, PennWell Global Energy Group, Essex, UK, (Nov. 2013).
221. Tsuji, T., Ishii, N., Oku, T., Anami, K., Nokiyama, K., Knisely, C.W., Morimoto, T., Sakuda, A., Nakai, H., Sawai, K.,Anami, K., Ishii, N., Knisely, C.W., Oku, T., Tsuji, T. Dynamic Stabilization of Folsom Dam Tainter-Gates by Replacing Hoist Chains with Cables Proc. of 11th International Conference on Flow-Induced Vibration, In: Flow Induced Vibration (eds: Z. Dimitrovov et.al), Paper No. 219 (CD-ROM), Lisbon, Portugal, (Jul. 2013), ISBN: 978-989-96264-4-7.
220. Tsuji, T., Ishii, N., Oku, T., Anami, K., Nokiyama, K., Knisely, C.W., Morimoto, T., Sakuda, A., Nakai, H., Sawai, K.,Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T. Steel-Rod Breaking Excitation Method to Identify Dynamic Instability of Full-Scale Tainter-Gates Proceedings of Hydro Vision 2013, Paper No. 4I-3 (Online), Denver, CO, USA (Jul. 2013).
219. Anami, K., Ishii,N., Tsuji, T., Yagi, K., Nakamura, M.,:Dynamic stability of practical Tainter gate "E" using steel-rod breaking excitation test Journal of Structural Engineering,Vol.59A, pp.637-646, (Mar. 2013)
218. Tsuji, T., Ishii, N., Oku, T., Anami, K., Nokiyama, K., Knisely, C.W., Morimoto, T., Sakuda, A., Nakai, H., Sawai, K., An Experimental Study of Lubrication at Thrust Slide-Bearing of Scroll Compressors - Effect of Thickness and Inside Form of Thrust Plate -, Proc. of International Compressor Engineering Conference at Purdue, Paper No. 1439, 2012-7.
217. Ishii, N., Tsuji, T., Oku, T., Anami, K., Knisely, C.W., Nokiyama, K., Morimoto, T., Sakuda, A., Sawai, K., Elasto-Hydrodynamic Lubrication Effect in Thrust-Slide Bearings of Scroll Compressors, Proc. of International Compressor Engineering Conference at Purdue, Paper No. 1438, 2012-7.
216. Tsuji, T., Oku, T., Ishii, N., Anami, K., Knisely, C.W., Maeda, T., Yamamoto, A, Calculated Optimal Mechanical Efficiency of a Large Capacity Reciprocating Compressor, Proc. of International Compressor Engineering Conference at Purdue, Paper, No. 1443, 2012-7.
215. Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T., Makihata, T.: Steel Rod Breaking Excitation to Identify Full-Scale Tainter Gate Dynamics, Proc. of 10th International Conference on Flow-Induced Vibration, In: Flow Induced Vibration (eds: Meskell, C. & Bennett, G.), pp.607-614, Dublin, Ireland, ISBN: 978-0- 9548583-4-6, 2012-7.
214. Anami, K., Tsuji, T., Ishii, N., Oku ,T., Knisely, C.W., :The steel-rod breaking excitation method for analysis of dynamic stability of Tainter gate Journal of Structural Engineering, Vol.58A, pp.552-558, (Mar. 2012).
213. Anami, K., Ishii, N., Knisely,C.W.: Pressure induced by vertical planar and inclined curved weir-plates undergoing streamwise rotational vibration, Journal of Fluids and Structures,Vol.29, pp.35-49, 2012-2.
212. Anami, K., Ishii, N., Knisely, C.W., Tsuji, T., Oku, T., Sato, S.:Friction-Maintained Dynamic Stability, Proc. of 10th biennial International Conference on Vibration Problems, Vibration Problems ICOVP 2011, Springer Proceedings in Physics 139, Prague, Czech Republic, pp.779-785,2011-9.
211. Ishii, N., Tsuji, T., Anami, K., Matsui. A., Knicely C. W.: “Exploration of Optimally Efficient Super-large Cooling Capacity Scroll Compressors for Air Conditioners”, Proc. of ICR 2011, 945, Prague, Czech Republic, 2011-8.
210. Tsuji, T., Ishii, N., Anami, K., Sawai K., Morimoto, T., Sakuda, A., Knisely C.: Exploration Study on the miniaturization of Optimally Efficient Scroll Compressors for Refrigerators, Proc. of ICR 2011, 943, Prague, Czech Republic, 2011-8.
209. Oku, T., Tsuji, T., Ishii, N., Anami K., Ueda, S., Matsui, A., Knisely, C.:Development of Optimized Low-Pressure Ammonia Scroll Compressors with Maximum Efficiency, Proceedings of ICR 2011, 940, Prague, Czech Republic, 2011-8.
208. Matsumoto, M., Ishizaki, H., Ishii, N., Kometani, S., Tsuji, T.: The Application of Fundamental Modes of Coupled Flitter for getting more Effective propulsion Forces - Ship Navigation with Flapping Plate, High Speed Fish Swimming, proceedings of 13th International Conference on Wind Engineering, Amsterdam, Nederland, 2011-7.
207. Ishii, N., Anami, K., Knisely, C., Tsuji, T., Oku, T.: Tainter Gates - Why Some Fail but Many Do Not, Proceedings of Hydro Vision 2011, Paper No. 1J-5, Sacramento, CA, USA, 2011-7.
206. Anami, K., Ishii, N., Tsuji, T., Oku, T., Goto, M., Yagi, K., Knisely, C.:Coupled-Mode Dynamic Instability of Tainter Gates with Parallel Bending Vibration of the Skinplate, Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels FEDSM2010-ICNMM2010, Montreal, Canada, 2010-8.
205. Sawai, K., Hiwata, A., Sakuda, A., Iida, N., Morimoto, T., Ishii, N.:A Study of a New Oil Injection to Compression Chambers on Scroll Compressors, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1196, West Lafayette, Indiana, USA, 2010-7.
204. Tsuji, T., Ishii, N., Anami, K., Sawai, K., Hiwata, A., Morimoto, T., Knisely, C.:Fundamental Optimal Performance Design Guidelines for Off-set Type Reciprocating Compressors to Maximize Mechanical Efficiency, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1358, West Lafayette, Indiana, USA, 2010-7.
203. Tsuji, T., Ishii, N., Sawai, K., Anami, K., Hiwata, A., Morimoto, T., Sano, K., Knisely, C.:On the Development of Optimaly Efficient Compact Scroll Compressors for Refrigirators, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1357, West Lafayette, Indiana, USA, 2010-7.
202. Ishii, N.: The Significance of Fundamental Academic Research in the Development of Super-Performance Compressors and Beyond (Plenary Speech at Purdue Conference in 2010), Proc. of 2010 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, 2010-7.
201. Ishii, N., Anami, K., Knisely, C.,Tsuji, T., Oku, T.:Analogy between the Coupled-Mode Vibration Failure of the Folsom Dam Tainter-Gate and the Tacoma Narrows Bridge Failure, Proc. of 1st Int’l Conf. on Advances in Interaction & Multiscale Mechanics (AIMM’10), pp.629-641, Jeju, Korea, 2010-6.
200. Tsuji, T., Ishii, N.,Oku, T., Anami, K., Sawai, K., Morimoto, T., Iida, N.,Matsui, A., Knisely, C.: FUNDAMENTAL OPTIMAL DESIGN GUIDELINES FOR RECIPROCATING COMPRESSORS TO MAXIMIZE MIECHANICAL EFFICIENCY, Proceeding of 2009 International Institute of Refrigeration, Papiernicka, Slovakia, 2009-9, 2009-10.
199. Ishii, N., Anami, K., Knisely, C.,Oku, T., Aslam, M.: Field vibration tests concerning the dynamic stability of tainter gates at the Poe power dam, Proceeding of 2009 INTERNATIONAL CONFERENCE AND EXHIBITION HYDRO 2009, Lyon, France, 2009-10.
198. Ishii, N., Anami, K., Knisely, C., Oku, T.: Field Tests Concerning the Dynamic Stability of Tainter Gates at the Thermalito Diversion Dam, Proceding of 2009 WaterpowerⅩⅥ Conference, Spokane, Washington, USA, 2009-7.
197. Sawai, K., Hiwata, A., Futagami, Y., Iida, N., Morimoto, T., Ishii, N.: Experimental Study of High Efficiency CO2 Scroll Compressor with a Control of Oil Flow to Compression Chamber, Trans. of the JSRAE Vol.26, No.4, 2009-6.
196. Sawai, K., Hiwata, A., Sakuda, A., Iida, N., Morimoto, T.,Ishii, N.: Experimental Study of High Efficiency on R410A Scroll Compressor -2nd Report: Efficiency Improvement with New Oil Injection to Compression Chambers-, Trans. of the JSRAE Vol.26, No.4, 2009-4.
195. Ishii, N., Oku, T., Anami, K., Tsuji, T., Ozasa, T., Sawai, K., Morimoto, T.,Iida, N. : An Experimental Study of Lubrication at Thrust Slide-Bearing of Scroll Compressors -Effect of thickness and inside Form of Thrust Plate-, Transactions of the JSRAE Vol.25, No.4, 2008-10.
194. Yoshida, H., Sakurada, A., Futagami, Y., Morimoto, T., Ishii, N. : Clearance Control of Scroll Compressor for CO2 Refrigerant , Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, 2008-7.
193. Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Fujiuchi, K. : Effects of Surface Roughness upon Gas Leakage Flow Through Small Clearances in CO2 Scroll Compressors,Proc. of 2008 International Compressor Engineering Conference at Purdue, 1429, West Lafayette, Indiana, USA, 2008-7.
192. Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Optimal Performance Development of High-Pressure Type Ammonia Scroll Compressors for Maximum Efficiency, Proc. of 2008 International Compressor Engineering Conference at Purdue, 1425, West Lafayette, Indiana, USA, 2008-7.
191. Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Optimal Performance Design Guidelines of Thrust Slide-Bering in Scroll Compressors for Maximum Efficiency,Proc. of 2008 International Compressor Engineering Conference at Purdue, 1428, West Lafayette, Indiana, USA, 2008-7.
190. Ishii, N., Anami, K., Oku, T., Makihata, T., Knisely, C.W. : ANALOGOUS TAINTER-GATE FAILURES IN JAPAN AND USA, FLOW-INDUCED VIBRATION , Prague 2008, 2008-6, 2008-7.
189. Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Experimental Study of the Lubrication Mechanism for Thrust Slide Bearings in Scroll Compressors, HVAC&R Research Journal ASHRAE Vol.14, No.3, pp.453-465, 2008-5.
188. Oku, T., Ishii, N., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Hiwata, A. : Theoretical Model of Lubrication Mechanism in the Thrust Slide-Bearing of Scroll Compressors, HVAC&R Research Journal ASHRAE Vol.14, No.2, pp.239-358, 2008-3.
187. Anami, K., Ishii, N., Makihata, T., Oku, T., Terakawa, N., Konya, Y. : 3D Model Tests for Coupled-Mode Self-Exited Vibration of Full-Scale Tainter-Gates(Week Vibration Synchronized with Whole Gate Vibration around Trunnion Pin), Dynamics & Dseign Conference 2007, 2007-9.
186. Anami, K., Ishii, N., Makihata, T., Oku, T., Tanino, S., Konya, Y., Maekawa, T. : Self-Excited Vibration Tests of Air Supply Valve for Ring Follower Gate in Water Release Pipe System of Dam, Dynamics & Design Conference 2007, 2007-9.
185. Ishii, N., Oku, T., Matsui, A., Anami, K., C.W.Knisely., Sawai, K., Morimoto, T., Iida, N. : A study on the lubrication mechanism at thrust slide-bearing of scroll compressors, Proc. of International Conference on Compressors and their Systems , pp.513-524, London, UK, 2007-9.
184. Ishii, N., Oku, T., Anami, K., Sawai, K., Sano, K., Morimoto, T. : Evaluation Method of Gas Leakage Flow Through Small Clearances in CO2 Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.273-280, 2007-9.
183. Sawai, K., Sakuda, A., Iida, N., Hiwata, A., Morimoto, T., Ishii, N. : Experimental Study on Efficiency Improvement of R410A Scroll Compressor for Air Conditioner -1st Report:Performance Improvement by Oil-injection into Compression Chamber-, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.265-272, 2007-9.
182. Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Iida, N. : An Optimal Performance Design on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.253-264, 2007-9.
181. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Field Measurement of Dynamic Instability of A50-Ton Tainter-Gate, Proc. of 2007,ASME Pressure Vessels and Piping Division Conference,PVP2007-26543(CD-ROM),ISBN 0-7918-3804-8, San Antonio,Texas,USA, 2007-7.
180. Sawai, K., Sakuda, A., Iida, N., Hiwata, A., Morimoto, T., Ishii, N., : Experimental Study on Efficiency Improvement of R410A Scroll Compressor for Air Conditioner - 1st Report : Performance Improvement by Oil-injection into Compression Chamber -, Trans. of the JSRAE Vol.24, No.3, pp265-272, 2007-4
179. Anami, K., Ishii, N., Makihata, T., Oku, T., Ohara, T. : Tainter-Gate failure in Japan, Science Council of Japan, Journal of Structural Engineering, Vol.53A, pp.589-596, 2007-3.
178. Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Hiwata, A. : A Theoretical Development on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.1, pp77-88, 2007-3.
177. Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Hiwata, A. : An Experimental Study on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.1, pp.65-75, 2007-3.
176. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Dynamic Instability Analysis of Folsom Reinforced Gate and Its Completely Stable Long-Term Operation, Mechanical Engineering Congress, 2006 Japan, Vol7, 2006-9.
175. Anami, K., Ishii, N., Oku, T., Sasaki, S. : Instantaneous Flow-Rate Coefficient in Tainter-Gate and Its Dependability of Gate Opening, Mechanical Engineering Congress, 2006 Japan, Vol7, 3717, pp.61-62, 2006-9.
174. Anami, K., Ishii, N., Oku, T., Tanino, S., Konya, Y. : Experimental Study of Flow-Rate Variation Pressure on Tainter-Gate, Mechanical Engineering Congress, 2006 Japan, Vol.7, 3716, P59-60, 2006-9.
173. Anami, K., Ishii, N., Oku, T., Sasaki, S., Terakawa, N.: Coupled-Mode Self-Exited Vibration Tests with 3D Large-Scaled Tainter-Gate Model(Examination about Friction-Maintained Dynamic Stability), Mechanical Engineering Congress, 2006 Japan, Vol7, 2006-9.
172. Anami, K., Ishii, N., Oku, T., Knisely, C.W., Todo, R.V., Oku, T., : Vibration Tests with a 1/13-Scaled 3-D Model of the Folsom Dam Tainter-Gate, Proceedings of 2006 HydroVision2006 Conference Technical Papers, Portland, Oregon, USA, 2006-7,2006-8.
171. Anami, K., Ishii, N., Knisely, C.W., Todo, R.V., Oku, T., : VIBRATION TESTS WITH A 1/13-SCALED 3-d MODEL OF THE FOLSOM DAM TAINTER-GATE AND ITS PREDICTION BY THEORY, Proceedings of 2006 ASME Pressure Vessels and Piping Division Conference, Vancoucer,BC, Canada, 2006-7.
170. Nakamoto, T., Sakuda, A., Sawai, K., Iida, N., Ishii, N. : DEVELOPMENT OF AIR PUMP FOR FUEL CELLS, Proc. of International Compressor Engineering Conference at Purdue, C158, West Lafayette, IN, USA, 2006-7.
169. Hiwata, A., Futagami, Y., Morimoto, T., Murakami, H., Ishii, N. : DEFORMATION CONTROL OF SCROLL COMPRESSOR FOR CO2 REFRIGERANT, Proc. of International Compressor Engineering Conference at Purdue, C140, West Lafayette, IN, USA, 2006-7.
168. Oku, T., Anami, K., Ishii, N., Knisely, C.W., Sawai, K., Morimot, T., Hiwata, A. : Optimal Performance Design Method of Thrust Slide-Bearing in Scroll Compressors for Its Best Efficiency, Proc. of International Compressor Engineering Conference at Purdue, C128, West Lafayette, IN, USA, 2006-7.
167. Oku, T., Anami, K., Ishii, N., Knisely, C.W., Sawai, K., Aya, T., Iida, N. : Leakage Tests of Wet CO2 Gas with Oil-Mixture in Scroll Compressors and Its Use in Simulations of Optimal Performance, Proc. of International Compressor Engineering Conference at Purdue, C127, West Lafayette, IN, USA, 2006-7.
166. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Recommendation of A Field Testing Device of Tainter Gates for Their Completely Stable Long-Term Operation, Proc. of International Symposium for the Impending Plans for Assuring the Dynamic Stability of U.S. Tainter Gate at OECU,Japan, pp.45-49, 2006-3.
165. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Dynamic Instability Analysis of Folsom Reinforced Gate and Its Completely Stable Long-Term Operation, Proc. of International Symposium for the Impending Plans for Assuring the Dynamic Stability of U.S. Tainter Gate at OECU,Japan, pp.37-44, 2006-3.
164. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Examination of The USBR Folsom Dam Forensic Report and Its Amendment for Subsequent Generations, Proc. of International Symposium for the Impending Plans for Assuring the Dynamic Stability of U.S. Tainter Gate at OECU,Japan, pp.28-36, 2006-3.
163. Anami, K., Ishii, N., Knisely, C.W., Oku, T. : Vibration Tests with 1/13-Scaled 3D Model of Folom Dam Tainter-Gate and Its Failure Analysis with Its Actual Proof, Proc. of International Symposium for the Impending Plans for Assuring the Dynamic Stability of U.S. Tainter Gate at OECU,Japan,pp.9-27, 2006-3 ?????
162. Anami, K., Ishii, N., Knisely, C.W. : Final Report of Folsom Dam Gate Failure in 1995 "Lessons from Folsom Dam Tainter-Gate Failure and Future Work for Subsequent Generations", submitted to Mid-Pacific Region, Bureau of Reclamation, U.S. Department of the Interior, 2005-12.
161. Anami, K., Ishii, N., Oku, T. : A Design Criterion for Dynamic Stability of Eccentric Tainter-Gates, Transactions of the Japan Society of Mechanical Engineers, 71-712, Series C (underprinting), 2005-12.
160. Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T., Hiwata, A. : BASIC STUDY OF GAS LEAKAGE FLOW THROUGH SMALL CLEARANCES IN SCROLL COMPRESSORS(Effect of surface roughness),Proceedings of the 2005 JSRAE Annual Conference, ISSN 0285-6867, C312, 2005-10.
159. Oku, T., Ishii, N., Anami, K., Sawai, K., Iida, N., Morimot, T., Hiwata, A. : ESTABLISHMENT OF OPTIMAL DESIGN METHOD OF LUBRICATION AT THRUST SLIDE-BEARING OF SCROLL COMPRESSORS (Basic Theoretical Analysis), Proceedings of the 2005 JSRAE Annual Conference, ISSN 0285-6867, C308, 2005-10.
158. Anami, K., Ishii, N., Oku, T., Uemura, Y. : Coupled-Mode Self-Exited Vibration Tests With 3D Large-Scaled Tainter-Gate Model, Mechanical Engineering Congress, 2005 Japan, Vol7, pp.229-230, 2005-9.
157. Oku, T., Ishii, N., Anami, K., Sano, T., Sawai, T., Morimoto, T., Hiwata, A. : AnExperimental Study of Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors(Examination of Friction Area and Thrust Force), Mechanical Engineering Congress, 2005 Japan , Vol4 pp299-300,2005-9.
156. Sawai, K., Sakuda, A., Nakamoto, T., Iida, N., Tsujimoto, T., Hukuhara, H., Murakami, H., Nagata, T., and Ishii, N. : Development of small size air compressor for mobile fuel cells,Proc. of 2005 International Conference On Compressors And Their Systems 2005,(London, UK),pp.109-117,2005-9.
155. Oku, T., Ishii, N., Anami, K., Knisely, C.W., Yasuda, K., Sawai, K., Sano, K. and Morimoto, T. : Gas Leakage in CO2 Scroll Compressors and Its Use in Simurations of Oprimal Performance, International Conference On Compressors And Their Systems, pp.403-412, London, UK, 2005-9.
154. Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T., Sano, K. : Theoretical Calculations of Lubrication at Thrust Slide-Bearing of Scroll Compressors for Its Optimal Performance, The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.
153. Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T. : Basic Study of Gas Leakage flow through Small Clearances in Scroll Compressors(Effect of Surface Roughness), The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.
152. Anami, K., Ishii, N., Oku, T., Takatomi, Y., Ohara, T., Sakamoto, H. : Experimental Study of Flow-Rate Variation Pressure on Tainter Gates, The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.
151. Anami, K., Ishii, N., Oku, T., Shirasaka, M., Uemura, Y., Sasaki, S., Murata, T. : Self-Excited Vibration Tests with a 1/13 Scale 3-Dimensional Model of Folsom-Dam Tainter-Gate, The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.
150. Anami, K., Ishii, N., Knisely, C.W., Oku, T., : Hydrodynamic Pressure Load on Folsom Dam Tainter-Gate at Onset of Failure due to Flow-Induced Vibrations, Symposium on Flow-Induced Vibration-2005, Proc. of ASME Pressure Vessels and Piping Conference, Vol.4, pp.557-564, Denver, CO, USA, 2005-7.
149. Anami, K., Ishii, N., Knisely, C.W., Matsumoto, Y., : Field Vibration Tests of a Flap Gate Undergoing Self-Excited Vibration and Its In-Water Vibration Frequency, Transactions of the Japan Society of Mechanical Engineers, Series B (underprinting), Vol.71, pp.1067-1074, 2005-4.
148. Oku, T.,Anami, K.,Ishii, N.,Yasuda, K.,Sawai, K.,Sano, K.,Morimoto, T., : BASIC RESEARCH OF GAS LEAKAGE FLOW THROUGH SMALL CLEARANCES IN CO2 SCROLL COMPRESSORS, Proceding of the 2004 JSRAE Annual Conference, D206.1-4, Hamamatsu, Japan, 2004-10.
147. Anami, K., Ishii, N. and Knisely, C.W.: Validation of Theoretical Analysis of Tainter Gate Instability Using Full-Scale Field Tests, Proc.of 2004 Flow-Induced Vibration Conference (Paris) , Vol.1, pp.409-414, 2004-7.
146. Anami, K., Ishii, N. and Knisely, C.W.: Field Vibration Tests and Dynamic Stability Analysis of a Full-Scaled Tainter-Gate, Proc. of 2004 ASME Pressure Vessels and Piping Conference (San Diego, California, USA), Vol.488, pp.81-88, 2004-7.
145. Oku, T., Anami, K., Ishii, N., Sano, K.: Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors (Theoretical Study), Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C104 (CD-ROM), 2004-7.
144. Ishii, N., Oku, T., Anami, K., Fukuda, A.: Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors (Experimental Study), Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C103 (CD-ROM), 2004-7.
143. >Yoshida, H., Kawano, H., Morimoto, T., Ishii, N.: Improvement of R410 Scroll Compressor Efficiency by Reduction of Leakage Loss, Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C094 (CD-ROM), 2004-7.
142. Hiwata, A., Futagami, Y., Morimoto, T., Ishii, N.: New Thrust Bearing Groove to Control the for CO2 Scroll Compressor without Accumulators, Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C078 (CD-ROM), 2004-7.
141. Ishii, N.,Anami, K.,Oku, T., : A Study on Dynamic Characteristics of Large-Opening Discharge Flow from Tainter Gates, Dynamics and Design Conference 2003, 628, Nagasaki, Japan, 2003-9.
140. Anami, K.,Ishii, N.,Ono, Y.,Shirasaka, M., : Model Investigations of Coupled-Mode Self-Excited Vibration of Folsom Tainter-Gate at Its Large Opening, Dynamics and Design Conference 2003, 627, Nagasaki, Japan, 2003-9.
139. Anami, K. and Ishii, N.: Model Tests for Non-Eccentricity Dynamic Instability Closely Related to Folsom Dam Tainter-Gate Failure, Symposium on Flow-Induced Vibration 2003, Proc. of ASME Pressure Vessels and Piping Conference, Vol. 465, pp. 213-222, Cleveland, Ohio, USA, 2003-7.
138. Anami, K., Ishii, N., Takano, W.: Empirical evaluation method of hydrodynamic pressures induced by vibrations of inclined circular-arc skinplate of Tainter gates, Journal of Structural Engineering, Vol.49A, pp.645-651, 2003-3 , (in Japanese).
137. Ishii, N., Kawamura, S., Yamamoto, S., Sawai, K., Hiwata, A., Nakamoto, T., Kawano, H. and Ting, K.S.: Efficiency Simulations with Consideration of Heat Losses of R410 Compact Scroll Compressor for Its Optimal Performance, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C22-3 (CD-ROM), 2002-7.
136. Ishii, N., Yamamoto, S., Sano, K., Sawai, K., Hiwata, A., Nakamoto, T. and Kawano, H.: Efficiency Simulations of a Compact CO2 Scroll Compressor and Its Comparison with Same Cooling Capacity R410A Scroll Compressor, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C22-2 (CD-ROM), 2002-7.
135. Hiwata, A., Iida, N., Futagami, Y., Sawai, K. and Ishii, N.: Performance Investigation with Oil-Injection to Compression Chambers on CO2-Scroll Compressor, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C18-4 (CD-ROM), 2002-7.
134. Anami, K., Ishii, N., and Takano, W.: Equivalent Added Mass and Wave-Radiation Damping Coefficients for Flow-Induced Rotational Vibrations of Vertical Weir Plate, Transactions of the Japan Society of Mechanical Engineers, Series B, 68-668, pp. 1072-1079, 2002-4 , (in Japanese).
133. Anami, K., and Ishii, N.: Model Tests foe Hydrodynamic Pressure Caused by Vibrations of a Vertical Flat Weir Plate and Verification of Theoretical Analysis, Transactions of the Japan Society of Mechanical Engineers, Series B, 68-662, pp. 719-725, 2002-3 , (in Japanese).
132. Ishii, N. and Anami, K.: Field and Model Investigations of FIV of Folsom Dam Tainter-Gate, Proc. of Commemorative International Symposium for the 40th Anniversary for the Foundation of the OECU, Vol.2, pp.143-164, 2001-11.
131. Anami, K. & Ishii, N.: Analyses of FIV of Folsom Dam Tainter Gates and Verifications by Model Tests, Proc. of Commemorative International Symposium for the 40th Anniversary for the Foundation of the OECU, Vol.2, pp.165-181, 2001-11.
130. Ishii, N. and Anami, K.: Application of Experiences and of Recent Findings with Tainter Gates in Japan on the Folsom Dam Gate Stability, Proc. of Commemorative International Symposium for the 40th Anniversary for the Foundation of the OECU, Vol.2, pp.193-206, 2001-11.
129. Nakata, A and Ishii, N.: Model gate Experiences on Hydrodynamic Forces and its Application to a Full-Scale Gate, Proc. of Commemorative International Symposium for the 40th Anniversary for the Foundation of the OECU, Vol.2, pp.221-231, 2001-11.
128. Sakuda, A., Sawai, K., Lida, N., Hiwata, A., Morimoto, T. and Ishii, N.: Performance improvement of scroll compressor with new sealing-oil supply mechanism, IMechE Conference Transactions of International conference on Compressors and their Systems, London, UK, 2001-9.
127. Nakata, A., Ishii, N.,Tokushima, K., Anami, K., Kusano, I.: A study of Discharge Flow from Vibrating Sluice Gates for Calculating Hydrodynamic Pressure, Symposium on Flow-Induced Vibration 2001 in Atlanta, Vol.420-2, pp.151-156, 2001-7.
126. Ishii, N., Anami, K., Knisely,C.W., Nakata, A.& Inoue, U.: A Study on Dynamic Stability of Large-Scaled Hydraulic Gates, Annual Report of Osaka Electro-Communication University, Vol.3, pp.29-35, 2001-7.
125. Nakata, A., Ishii, N., Tokushima, K., Anami, K. and Kusano, I.: Characteristics of discharge flow from vibrating gates and examinations of theoretical calculation on hydrodynamic pressure, Journal of Structural Engineering, Vol. 47A, pp.951-956, 2001-3.
124. Anami, K., Ishii, N. and Yamasaki, M.: Hydrodynamic Pressure Induced by Rotating Skinplate of Folsom Dam Tainter-Gate, Transactions of the Japan Society of Mechanical Engineers, Series B, 68-652, pp. 3116-3123, 2000-12, (in Japanese).
123. Anami, K. and Ishii, N., Knisely, C.W. and Matsumoto, Y.: Measured and Calculated Vibration Characteristics of a Full-Scale Flap Gate Undergoing Self-Excited Vibration, Proc. of 2000 ASME Pressure Vessels and Piping Conference, (Seattle, Washington, USA), PVP-Vol. 414-1, M.Souli (ed.), pp.23-29, 2000-7.
122. Ishii, N., Morita, N., Kurimoto, M., Yamamoto, S. and Sano, K.: Calculations for Compression Efficiency Caused by Heat Transfer in Compact Rotary Compressors, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.467-474, 2000-7.
121. Ishii, N., Morita, N., Ono, M., Yamamoto, S. and Sano, K.: Net Efficiency Simulations of Compact Rotary Compressors for Its Optimal Performance, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.475-482, 2000-7.
120. Sawai, K., Iida, N., Hasegawa, H. and Ishii, N.: Dynamic Analysis of New Volumetric Compressor with Rotating Cylinder and Piston, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.777-784, 2000-7.
119. Nakata, A. and Ishii, N.: Model Development of Flow-Induced Vibrations of Shell-Type Long-Span Gates with Underflow (2nd Report, Added Mass, Fluid Damping and Excitation Coefficients), Transactions of the Japan Society of Mechanical Engineers, Series B1, 68-646, pp. 98-105, 2000-6, (in Japanese).
118. Anami, K. and Ishii, N.: Flow-Induced Dynamic Instability Closely Related to Folsom Dam Tainter-Gate Failure in California, in Ziada & Staubli, Flow Induced Vibration, pp.205-212, 2000-6.
117. Sawai, K., Iida, N., Futagami, Y.,Hirano, H., Hasagawa, H. and Ishii, N.: Development of new volumetric compressor with rotating cylinder and piston, Proceedings of 1999 International Conference on Compressors and Their Systems, London, UK, pp.609-616, 1999-9.
116. Anami, K. and Ishii, N.: Flow-Induced Coupled-Mode-Vibration of Folsom Dam Tainter-Gates in California, Proceedings of 1999 ASME Pressure Vessels and Piping Conference (Boston, Massachusetts, USA), PVP-Vol.396, W. L. Cheng (ed.), pp.343-350, 1999-8.
115. Ishii, N. and Anami, K.: Folsom Dam Gate Failure and Its Dynamic Similarity of Flow-Induced Vibrations, Journal of Wind Engineering, No.78, pp.43-44, 1999-3, (in Japanese).
114. Anami, K. and Ishii, N.: In-air and in-water natural vibrations of Folsom Dam Radial Gate in California, in Allison, Experimental Mechanics 1 (Advances in design, testing and analysis), 1998 Balkema, pp.29-34, 1998-8.
113. Ishii, N., Hitotsubashi, M., Yamamoto, S., Matsunaga, H., Hashimoto, T. and Sano, K.: Volumetric Similarity for Vibrations of Reed Valve in Refrigerant Compressors, Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.99-104, 1998-7.
112. Kohayakawa, T., Yamamoto, S., Sawai, K., Hase, S., Morimoto, T., Ashitani, H. and Ishii, N.: Performance Evaluation of Horizontal Type Scroll Compressor for Alternative Refrigerant (R410A), Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.435-440, 1998-7.
111. Ishii, N., Bird, K., Yamamoto, S., Matsunaga, H., Sano, K. and Hayashi, M.: A Fundamental Optimum Design for High Mechanical and Volumetric Efficiency of Compact Rotary Compressors, Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.649-654, 1998-7.
110. Anami, K. and Ishii, N.: In-Water Streamwise Vibration of Folsom Dam Radial Gates in California, Proceedings of 1998 ASME/JSME Joint Pressure Vessels and Piping Conference (San Diego, California, USA), PVP-Vol.363, pp.87-94, 1998-7.
109. Sano, K., Kawahara, S., Fujiwara, N. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (1st Report: Reduction of Noises caused by Resonance of each Scroll Compressor Element), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.125-136, 1997.
108. Sano, K., Kawahara, S., Fujiwara, N. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (2nd Report: Noises due to Cavity Resonance in Various Compressor Spaces), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.137-148, 1997.
107. Sano, K., Kawahara, S., Akazawa, T. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (3rd Report: Electro-magnetic Noise for Inverter Driven Compressor), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.149-158, 1997.
106. Sano, K., Kawahara, S., Akazawa, T. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (4th Report: Compressor Vibrations and their Transfer Control), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.3, pp.233-243, 1997.
105. Sano, K. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (5th Report: Enclosure Construction for Compressor), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.3, pp.245-253, 1997.
104. Ishii, N.: Dynamic Stability Evaluation for Folsom Dam Radial Gate and Its Inherent Non-Eccentricity Instability, submitted to Bureau of Reclamation, U.S. Department of the Interior, July 17,1997.
103. Nakata, A., Ishii, N., Nishihara, K., Kimura, I., Tokushima, K., Ogawa, H. and Asada, T.: Instantaneous Flow-Rate Coefficient for Shell-Type Long-Span Gates Vibrating under a Small Gate Opening, Proc. of 1997 ASME Fluids Engineering Division Summer Meeting (Vancouver, British Columbia, CANADA), FEDSM97-3080, 1997-6.
102. Knisely, C.W., Klein, G.B. and Ishii, N.: Measurements of Added Mass and Damping on Hydraulic Gate Models, Proceedings of 1997 ASME Fluids Engineering Division Summer Meeting (Vancouver, British Columbia, CANADA), FEDSM97-3033, 1997-6.
101. Nakata, A., Ishii, N., Nishihara, K., Kimura, I., Tokushima, K., Nishizawa, T., Ogawa, H. and Asada, T.: Characteristics of Fluctuating Discharge Flow in Shell-Type Long-Span Gates, Journal of Structural Engineering, Vol. 43A, pp.995-960, 1997-3.
100. Nakata, A. and Ishii, N.: Model Development of Flow-Induced Vibrations of Shell-Type Long-Span Gates with Underflow (1st Report, Derivation of Equation of Motion), Transactions of the Japan Society of Mechanical Engineers, Series B, 63-668, pp.560-568, 1997-2.
099. Nakata, A., Ishii, N., Knisely, C.W., Irie, K. and Moriya, Y.: Effects of Weir Plate Inclination Angle on Flow-Induced Vibration of Long-Span, Shell-Type Gates, Transactions of the Japan Society of Mechanical Engineers,Series B, 62-600, pp.128-135, 1996-8.
098. Moriya, Y. and Ishii, N.: Humidity Control System with Adsorption Materials, JSME International Journal, Series B, Vol.39, No.3, pp.653-659, 1996-8.
097. Moriya, Y. and Ishii, N. : Humidity Control System with Adsorption Materials, JSME International Journal, Series B, Vol.39, No.3, pp.653-659, 1996-8.
096. Moriya, Y., Oyama, M. and Ishii, N.: A Humidifier for Automobile with an Adsorption and Interior Air Quality Improvement, Proceedings of the 7th International Conference on Indoor Air Quality and Climate (Nagoya), Vol.3, pp.465-470, 1996-7.
095. Moriya, Y., Shirai, Y., Hara, M. and Ishii, N.: An Unvented Space Heater with a Low NOx and CO level Combustor, Proceedings of the 7th International Conference on Indoor Air Quality and Climate (Nagoya), Vol.3, pp.483-488, 1996-7.
094. Hase, S., Yamamoto, S., Hirano,H., Kohayakawa, T., Kawano H., Futagami, Y., Oka, H. and Ishii, N.: Development of a Compact Horizontal-Type Scroll Compressor for Alternative Refrigerants, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.303-309, 1996-7.
093. Morimoto, T., Yamamoto, S., Hase, S., Yamada, S. and Ishii, N.: Development of a High SEER Scroll Compressor, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.317-322, 1996-7.
092. Ishii, N., Bird, K., Sano K., Oono, M., Iwamura S. and Otukura T.: Refrigerant Leakage Flow Evaluation for Scroll Compressors, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.633-638, 1996-7.
091. Ishii, N., Sakai, M., Sano, K., Yamamoto S. and Otokura T.: A Fundamental Optimum Design for High Mechanical and Volumetric Efficiency of Compact Scroll Compressors, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.639-644, 1996-7.
090. Nakata, A., Ishii, N., Knisely, C.W., Irie, K. and Moriya, Y.: Effects of Weir Plate Inclination Angle on Flow-Induced Vibrations of Long-Span, Shell-Type Gates, JSME International Journal, Series. C, Vol.39, No.2, pp.203-211, 1996-6.
089. Ishii, N. and Nakata, A.: Flow-Induced Flexural Vibration of Long-Span Gates (Vibration Frequency and Fluid-Excitation Ratios), in P.W. Bearman, Flow-Induced Vibration, pp.139-148, Balkema, 1995.
088. Ishii, N.: Folsom Dam Gate Failure Evaluation Based on Modal Analysis and Suggestion, submitted to Bureau of Reclamation, U.S. Department of the Interior, November 8, 1995.
087. Ishii, N.: Folsom Dam Gate Failure Evaluation and Suggestions, submitted to Bureau of Reclamation, U.S. Department of the Interior, August 24, 1995.
086. Ishii, N., Nakata, A., Irie, K., Moriya, Y. and Ogawa, T.: Effects of Inclined Weir Plate Angle of Shell-Type Long-Span Gates upon Flow-Induced Vibrations, Proceedings of 1995 ASME/JSME Pressure Vessels and Piping Division Meeting on Natural Hazard Phenomena and Mitigation (Honolulu, Hawaii, USA), ASME PVP-Vol.308, pp.255-262, 1995-7.
085. Moriya, Y. and Ishii, N.: An Adsorption Material Type Humidifier for Automobiles and Interior Air Quality Improvement, Transactions of the Japan Association of Refrigerating, Vol.12, No.1, pp.120-133, 1995-3.
084. Ishii, N., Knisely, C.W. and Nakata, A.: Field Study of A Long-Span Shell-Type Gate Undergoing Flow-Induced Vibrations, Journal of Fluid and Structures, Vol.9, No.1, pp.19-41, 1995-1.
083. Moriya, Y. and Ishii, N.: A Humidity Control System with an Adsorption Material and Indoor Air Quality Improvement, Transactions of the Japan Association of Refrigerating, Vol.11, No.3, p.371-381, 1994.
082. Yanagida, N., Moriya, Y. and Ishii, N.: Studies on Indoor Air Quality by Using Adsorption Characteristics of the Desiccant, Proceedings of 12th International Symposium on Contamination Control, p.243-248, 1994-10.
081. Moriya, Y., Ishii, N. and Shirai, Y.: Development and Experimental Studies of a Fan-Assisted Room Heater with a Low NOx and CO Level Burner, Proceedings of 12th International Symposium on Contamination Control, p.289-294, 1994-10.
080. Moriya, Y., Ishii, N. and Yamada, K.: NOx Formation Behavior Affecting the Prediction of Indoor Concentration, Proceedings of 12th International Symposium on Contamination Control, p.301-306, 1994-10.
079. Moriya, Y. and Ishii, N.: An Evaluation of the Adsorption Humidity Control on Indoor Air Quality, Proceedings of the 3rd International Conference of '94 Healthy Building, p.129-134(vol.1), 1994-8.
078. Moriya, Y. and Ishii, N.: Development and Experimental Studies of an Unvented Space Heater with a Low NOx and CO Level Burner, Proceedings of the 3rd International Conference of '94 Healthy Building, p.121-126(vol.2), 1994-8.
077. Ishii, N., Yamamura, M., Muramatsu, S., Yamada, S. and Takahashi, M.: A Study on High Mechanical Efficiency of a Scroll Compressor with Fixed Cylinder Diameter, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.677-682, 1994-7.
076. Hase, S., Sano, K., Yamamoto, S., Hirano, H., Kobayakawa, T. and Ishii, N.: Development of the High-Efficiency Horizontal-Type Scroll Compressor, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.447-452, 1994-7.
075. Ishii, N., Fukushima, M., Muramatsu, S., Matsunaga, H. and Nakazumi, K.: Self-Excitation Mechanism of Reed Valve in Refrigerant Compressors, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.785-790, 1994-7.
074. Ishii, N., Knisely, C.W. and Nakata, A.: Coupled-Mode Vibration of Gates with Simultaneous Over- and Underflow, Journal of Fluids and Structures, Vol.8, No.5, pp.455-469, 1994-7.
073. Ishii, N. & Nakata, A.: Vibration Problems in Hydraulic Structures (Flow-Induced Vibration of Shell-Type Long-Span Gates), Journal of Wind Engineering, No.59, pp.75-79, 1994-5, (in Japanese).
072. Ishii, N. and Ymamoto, S.: Fundamental Design for Optimization of A Scroll Compressor, Turbomachinery, 21-12, pp.729-733, 1993-8 (in Japanese).
071. Sawai, K. and Ishii, N.: Performance and Reliability Improvement Technologies for A Small Cooling Capacity Scroll Compressor for Air Conditioners, Turbomachinery, 21-12, pp.746-751, 1993-7.
070. Ishii, N., Knisely, C.W. and Nakata, A.: Field Studies of A Full-Scale Long-Span Shell-Type Gate Undergoing Flow-Induced Vibrations, Proceedings of 1993 ASME/JSME Pressure Vessels and Piping Division Meeting on Flow-Induced Vibration and Fluid-Structure Interaction, (Denver, Colorado, USA), ASME PVP-Vol.258, pp.163-177, 1993-7.
069. Moriya, Y., Ishii, N. and Yanagida, N.: Development and Experimental Studies of an Adsorption Humidity Control Apparatus for Residential Application, Indoor Air'93, the 6th International Conference on Indoor Air Quality and Climate, p.443-448, 1993-7.
068. Sawai, K., Murayama, M., Kozima, Y., Yamamoto, S., Kawahara, S., Sakai, M., Tubokawa, M. and Ishii, N.: A Compact Horizontal Scroll-Type Compressor for Room Air Conditioners, Trans . (JAR), Vol.10, No.3, pp.511-517, 1993-5.
067. Ishii, N., Fukuoka, H., Matsunaga, H., Fukushima, M. and Nakazumi, K.: Dynamic Stability Criterion for Reed Valves in Refrigerant Compressors, JSME International Journal, Ser.C, Vol.36, No.1, pp.69-76, 1993-3.
066. Ishii, N., Nakata, A. and Maruyama, T.: A Study for Fluctuating Flow Rate from a Streamwise Vibrating Gate (Flow Velocity Measurement by Laser Doppler Velocimeter and Instantaneous Flow-Rate Coefficient), Journal of Structural Engineering, Vol.39A, pp.875-882, 1993-3.
065. Ishii, N., Ymamoto, S., Ymamura, M., Takahashi, M., and Muramatsu. S.: A Study for High Mechanical Efficiency of A Scroll Compressor with Fixed Cylinder Diameter and Suction Volume, Turbomachinery, 21-10, pp.585-593, 1993-3.
064. Ishii, N., Knisely, C.W. and Nakata, A.: Coupled-Mode Vibration of Gates with Simultaneous Over-and Underflow, Proceedings of International Symposium on Flow-Induced Vibration and Noise, Vol.6, pp.193-205, 1992-11.
063. Ishii, N and Knisely, C.W.: Flow-Induced Vibration of Shell-Type Long-Span Gates, Journal of Fluids and Structures, Vol.6, No.6, pp.681-703, 1992-11.
062. Ishii, N.: Flow-Induced Vibration of Long-Span Gates (Part I : Model Development), Journal of Fluids and Structures, Vol.6, No.5, pp.539-562, 1992-9.
061. Ishii, N., Yamamoto, S., Muramatsu, S., Yamamura, M. and Takahashi, M.: Optimum Combination of Parameters for High Mechanical Efficiency of a Scroll Compressor, Proceedings of 1992 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, pp.118a1-118a8, 1992-7.
060. Ishii, N., Fukuoka, H., Matsunaga, H., Fukushima, M. and Nakazumi, K.: Dynamic Stability Criterion for Reed Valves in Refrigerant Compressors, Proceedings of 1992 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.137-146, 1992-7.
059. Sawai, K., Yamamura, M., Kojima, Y., Yamamoto, S., Kawahara, S., Sakai, M., Tsubokawa, M. and Ishii, N.: A Compact Horizontal Scroll-Type Compressor for Room Air Conditioners, Proceedings of 1992 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.569-575, 1992-7.
058. Ishii, N. and Knisely, C.W.: Flow-Induced Vibration of Long-Span Gates due to Shed Vortices (Vibration Criteria, Level of Fluid Excitation and Added Mass), JSME International Journal, SeriesⅢ, Vol.35, No.1, pp.1-8, 1992-3.
057. Ishii, N., Nakata, A. and Nozima, T.: Flow-Induced Vibration of Sell-Type Long-Span Gates, Journal of Structural Engineering, Vol.38A, pp.837-850, 1992-3.
056. Ishii, N. and Naudascher, E.: A Design Criterion for Dynamic Stability of Tainter Gates, Journal of Fluids and Structures, Vol.6, No.1, pp.67-84, 1992-1.
055. Ishii, N., Matunaga, H., Yamamura, M., Matumura, S. and Fukusima, M.: Flow-Induced Vibration of Shell-Type Long-Span Gates (2nd Report, a Study for Fundamental Vibration Characteristics of Under-Flow Type), Transactions of the Japan Society of Mechanical Engineers, Series C, 57-533, pp.35-41, 1991-1.
054. Ishii, N.: Flow-Induced Vibration of Long-Span Gate (4th Report, Vibration Frequency Ratio and Fluid Damping Ratio), Transactions of the Japan Society of Mechanical Engineers, Series C, 56-531, pp.49-54, 1990-11.
053. Ishii, N., Iwao, N. and Suzuki, H.: Flow-Induced Vibration of Shell-Type Long-Span Gates(1st Report, Fundamental Vibration Characterstics of the Under-Flow Type)Transactions of the Japan Society of Mechanical Engineers, Series C, 56-531, pp.42-48, 1990-11.
052. Ishii, N.: Flow-Induced Vibration of Long-Span Gates (Verification of Added Mass and Fluid Damping), Proceedings of IAHR & AIRH Symposium (Belgrade, Yugoslavia), p.N-1-1 - N-1-9, 1990-9.
051. Yamamura, M., Muramatsu, S., Kojima, Y., Yamamoto, S., Kawahara, S. and Ishii, N.: Compact Type Scroll Compressor for Air Conditioners, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.140-146, 1990-7.
050. Ishii, N., Yamamura, M., Muramatsu, S., Yamamoto, S. and Sakai, M.: Mechanical Efficiency of a Variable Speed Scroll Compressor, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.192-199, 1990-7.
049. Ishii, N., Abe, Y., Taguchi, T., Maruyama, T. and Kitamura, T.: Dynamic Behavior of Variable Displacement Wobble Plate Compressor for Automotive Air Conditioners, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.345-353, 1990-7.
048. Ishii, N., Fukushima, M., Yamamura, M., Fujiwara, S. and Kakita, S.: Optimum Combination of Dimensions for High Mechanical Efficiency of a Rolling-Piston Rotary Compressor, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.418-424, 1990-7.
047. Ishii, N. and Knisely, C.W.: Shear Layer Behavior Under a Streamwise Vibrating Gate and Its Significance to Gate Vibration, JSME International Journal, Series ?, Vol.33, No.2, pp.131-138, 1990.
046. Ishii, N.: Flow-Induced Vibration of Long-Span Gates (Verification of Added Mass and Fluid Damping), JSME International Journal, SeriesII, Vol.33, No.4, pp.642-648, 1990.
045. Ishii, N., Charles W. KNISELY. and Sanagi, T.: Flow-Induced Vibration of Long-Span Gates Caused by Shedding Vortices (1st Report, Vibration Criteria, Level of Fluid Excitation and Added Mass)Transactions of the Japan Society of Mechanical Engineers, Series B, 55-519, pp.2724-2730, 1989-11.
044. Ishii, N., Yamamura, M., Morokoshi, H., Fukusima, M., Yamamoto, S. and Sakai, M.: Dynamic Characteristics of a Variable Scroll Compressor (1st Report, Dynamic Behavior), Transactions of the Japan Society of Mechanical Engineers, Series C, 55-517, pp.2436-2445, 1989-9.
043. Ishii, N., Fukushima, M., Yamamura, M., Muramatsu, S., Sano, K. and Sakai, M.: The High Mechanical Efficiency of Rolling-Piston Rotary Compressors, Proceedings of the 2nd World Congress on Heating, Ventilating, Refrigeration and Air Conditioning(CLIMA2000), Sarajero, Yugoslavia, pp.91-96, 1989-8.
042. Ishii, N. and Knisely, C.W.: Shear Layer Dynamics and Unsteady Discharge Beneath a Long Span Gate Undergoing Streamwise Vibrations (ed. Maksimovic, C. and Radjkovic, M.), Computational Modelling and Experimental Methods in Hydraulics (HYDROCOMP'89, Duburovnik, Yugoslavia), pp.500-509, 1989-6, Elsevier Applied Science.
041. Ishii, N., Fukusima, M., Yamamura, M., Muramatu, S., Sano, K. and Sakai, M.: The High Mechanical Effciency of Rolling-Piston Rotary Compressors (2nd Report, Theoretical Study), Transactions of the Japan Society of Mechanical Engineers, Series C, 55-511, pp.687-695, 1989-3.
040. Ishii, N., Yamamura, M., Muramatu, S., Fukushima, M., Sano, K. and Sakai, M.: The High Mechanical Effciency of Rolling-Piston Rotary Compressors (1st Report, Experimental Study), Transactions of the Japan Society of Mechanical Engineers, Series C, 54-507, pp.2578-2582, 88.
039. Ishii, N., Fukushima, M., Sawai, K., Sano, K. and Imaichi, K.: Dynamic Behavior of a Scroll Compressor (Dynamic Analysis), JSME International Journal, Series 3, Vol.31, No.1, pp.58-67, 1988.
038. Ishii, N. and Imaichi, K.: Flow Induced Vibration of Tainter Gates at the Outlet of Shallow Reservoirs (Derivation of the Equation of Motion), Transactions of the Japan Society of Mechanical Engineers, Series B, 54-508, pp.3444-3448, 1988-12.
037. Ishii, N., Imaichi, K., Edward Naudascher., Horii, D. and Shibata, T.: Flow Induced Vibration of Long Span Gates (3rd Report, Verification of Added Mass and Fluid Damping), Transactions of the Japan Society of Mechanical Engineers, Series B, 54-507, pp.3151-3156, 1988-11.
036. Ishii, N., Yamamura, M., Fukushima, M., Murozono, K. and Sakai, M.: Dynamic Behavior of a Slider-Crank Drive Stirling Machine, Proceedings of 4th International Conference on Stirling Engines, Tokyo, pp.93-98, 1988-11.
035. Ishii, N. and Knisely, C.W.: Shear Layer Behavior Under a Streamwise Vibrating Gate and Its Significance to Gate Vibration, Proceedings of 2nd International Symposium on Fluid-Control Measurement Mechanics and Flow Visualization (FLUCOME'88 Sheffield), pp.45-49, 1988-9.
034. Ishii, N., Edward Naudascher., Imaichi, K. and Sanagi, T.: Flow Induced Vidration of Long Span Gates (2nd Report, Added Mass and Fluid Damping), Transactions of the Japan Society of Mechanical Engineers, Series B, 54-504, pp.1977-1984, 1988-8.
033. Ishii, N., Yamamura, M., Morokoshi, H., Fukushima, M., Yamamoto, S. and Sakai, M.: On the Superior Dynamic Behavior of a Variable Rotating Speed Scroll Compressor, Proceedings of 1988 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.75-82, 1988-7..
032. Ishii, N., Yamamura, M., Morokoshi, H., Muramatsu, S., Sawai, K., Osaka, M., Yamamura, M.: Mechanical Efficiency of Various Large Capacity Scroll Compressors, Proceedings of 17th International Congress of Refrigeration, Wien Austria, pp.468-474, 1987.
031. Ishii, N., Ymamura, M., Morokoshi, H., Muramatsu, S., Sawai, K. and Ymamuka, M:, Mechanicai Efficiency of Various Large Capacity Scroll Compressors, Transactions of the Japan Society of Mechanical Engineers, Series C, 53-495, Series C, 53-495, pp.2295-2302, 1987-11.
030. Ishii, N., Edward Naudascher. and Imaichi.: Flow Induced Vibration of Long Span Gates (Derivation of Equation of Motion), Transactions of the Japan Society of Mechanical Engineers, Series B, 53-495, pp.3267-3273, 1987-11.
029. Ishii, N., Fukushima, M., Sawai, K., Sano, K. and Imaichi, K.: Dynamic Behavior of a Scroll Compressor (Dynamic Analysis) , Transactions of the Japan Society of Mechanical Engineers, Series C, 53-491, pp.1368-1376, 1987-7.
028. Ishii, N., Naudascher, E. and Thang, N.: A Flow-Induced Vibration of Long-Span Gates, Proceedings of International Conference on Flow-Induced Vibration, Bowness-on-Windermere, pp.293-304, 1987-5.
027. Ishii, N., Fukushima, M., Sano, K. and Sawai, K.: A Study on Dynamic Behavior of A Scroll Compressor, Proceedings of 1986 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.III, pp.901-916, 1986-8.
026. Imaichi, K., Ishii, N., Muramatsu, S., Fukushima, M. and Matsunaga, H.: Relation between Vibratoins and Crankshaft Rotatory Behavior of a Rolling-Piston Rotary Compressor When It Stops. Transactions of the Japan Society of Mechanical Engineers, Series C, 51-469, pp.2213-2223, 1985-9.
025. Ishii, N., Naudascher, E. and Imaichi, K.: Reservoir Depth Effects upon Hydrodynamic Loading of Tainter-Gates, Proceedings of EUROMECH 188, pp.56-57, 1984-9.
024. Ishii, N., Imaichi, K., Muramatsu, S., Fukushima, M. and Matsunaga, H.: The Study of Rolling Piston, Rotary Compressor Dynamic Behavior When Stopping to Reduce Noise and Vibration Level, Proceedings of 1984 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, pp.1-8, 1984-7.
023. Ishii, N. and Naudascher, E.: Field Tests on Natural Vibration Modes of A Tainter Gates, in K.V.H. Smith, Channels and Channel Control Structures, pp.209-222, 1984-4, Southampton, Springer-Verlag.
022. Imaichi, K., Ishii, N., Imasu, K., Muramatsu, S. and Fukushima, M.: A Vibration Source in Refrigerant Compressors, Transactions of the ASME, Journal of Vibrations, Stress, Reliability and Design, Vol.106, pp.122-128, 1984-1.
021. Ishii, N., Imaichi, K., Muramatsu, S. and Fukushima, M.: A Computer Simulation of Higher Frequency Vibrations of A Reciprocating Compressors, Proceedings of 16th International Congress of Refrigeration, pp.418-423, 1983.
020. Imaichi, K., Fukushima, M., Muramatsu, S. and Ishii, N.: Vibration Analysis of Rotary Compressors. Transactions of the Japan Society of Mrchanical Engineers, Series C, 49-447, pp.1959-1970, 1983-11.
019. Ishii, N., Imaichi, K. and Yamasaki, M.: Flow-Induced Structural Vibration of Single-Arm Tainter-Gates, Proceedings of 20th IAHR Congress, Moscow, pp.317-324, 1983-9.
018. Imaichi, K., Fukushima, M., Muramatsu, S. and Ishii, N.: Vibration Analysis of Rotary Compressors, Proceedings of the 1982 Purdue International Compressor Engineering Conference, pp.275-282, 1982-7.
017. Ishii, N. and Imaichi, K.: Instability of elastically suspended Tainter-gate system caused by surface waves on the reservoir of a dam (Approximate Solution), Transactions of the Japan Society of Mechanical Engineers, Series B, 48-428, pp.640-647, 1982-4.
016. Imaichi, K., Ishii, N. and Imasu, K.: A Vibration Source in Refrigerant Compressors, Design Engineering Technical Conference, ASME, pp.1-8, 1981-6.
015. Ishii, N., Imaichi, K.& Hirose, A.: Dynamic Instability of Tainter-Gates, in Naudascher, E. & Rockwell, D., Practical Experiences with Flow-Induced Vibrations, pp.452-460, 1979, Berlin, Springer-Verlag.
014. Imaichi, K., Ishii, N., Imasu, K., Muramatsu, S. and Fukushima, M.: High Frequency Vibratory Components Caused by Elastic Vibrations of the Crankshaft in Refrigerating Compressors, Proceedings of the 1980 Purdue International Compressor Engineering Conference, pp.90-96, 1980-7.
013. Imaichi, K., Ishii, N., Imasu, K., Muramatu, S. and Fukusima, M.: High Frequency Vibratory Components Caused by Elastic Vibrations of the Crank Shaft in Refrigerating Compressors, Refrigeratoin(JAR), 55-636, pp.851-857, 1980-5.
012. Imaichi, K. and Ishii, N.: A Device for Silently Stopping Single-Cylinder Reciprocating Compressors, with Almost No Vibrations, International Congress of refrigeration in Venezia, p.23 ,1979.
011. Imaichi, K., Ishii, N., Imasu, K. and Murai, M.: A Device for Stopping Single-Cylinder Reciprocating Compressors Silently by Greatly Reducing Vibrations, Proceedings of 15th International Congress of Refrigeration, Vol.II, pp.727-733, 1979.
010. Imaichi, K. and Ishii, N.: A Self-Excited Vibration of Tainter Gates. Hydraulic Gate and Penstock, No.113, pp.1-11, 1978.
009. Imaichi, K., Ishii, N., Saito, S. and Imasu, K.: Leakage Effects on Indicator Diagrams at Stopping of Reciprocating Compressors, Proceedings of Purdue Compressor, Technology Conference, pp.283-288, 1978-7.
008. Ishii, N., Imaichi, K.& Hirose, A.: Instability of Elastically Suspended Tainter-Gate System Caused by Surface Waves on the Reservoir of a Dam, Transactions of the ASME, Journal of Fluid Engineering, Ser.I, Vol.99, No.4, pp.699-709, 1977-12.
007. Imaichi, K. and Ishii, N.: Instability of an Idealized Tainter-Gate System without Damping Caused by Surface Waves on the Back Water of Dam, Bulletin of JSME, Vol.20, No.146, pp.963-970, 1977-8.
006. Ishii, N. and Imaichi, K.: Water Waves and Structural Loads Caused by a Periodic Change of Discharge from a Sluice-Gate, Bulletin of JSME, Vol.20, No.146, pp.988-1008, 1977-8.
005. Imaichi, K., Ishii, N., Murai, M. and Imasu, K.: Dynamic Stop Behavior of a Small Reciprocating Compressor, Transactions of the Japan Society of Mechanical Engineers, 42-364, pp.3842-3852, 1976-12.
004. Ishii, N. and Imaichi, K.: Instability of an Idealized Tainter-Gate System without Damping Caused by Surface Waves on the Backwater of Dam, Transactions of the Japan Society of Mechanical Engineers, 42-364, pp.3853-3861, 1976-12.
003. Imaichi, K. and Ishii, N.: Water Waves and Structural Loads Caused by a Periodic Change of Discharge from a Sluice Gates, Transactions of the Japan Society of Mechanical Engineers, 42-364, pp.3929-3941, 1976-12.
002. Ishii, N., Imaichi, K., Kagoroku, N. and Imasu, K.: Vibrations of a Small Reciprocating Compressor, Design Engineering Technical Conference, Washington, D.C, ASME, pp.1-12, 1975-9.
001. Imaichi, K., Ishii, N. and Kagoroku, N.: Vibrations of a Small Reciprocating Compressor, Transactions of the Japan Society of Mechanical Engineers, 41-348, pp.2333-2346, 1975-8.
back
|
