123.      Sawai, K., Doi, M., Ishii, N., Nakai, H., Morimoto, T., Dynamic Analysis of Swing Piston Rotary Compressor, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.33, No.2, pp.93-104, (2016).

122.      Ishii, N., Tsuji, T., Nonoguchi, E., Anami, K., Terada, Y., Morimoto, T., Knisely, C.W., Empirical Calculation Method for Bypass leakage in Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1499, (July 11-14, 2016).

121.      Ishii, N., Nonoguchi, E., Anami, K., Sakuda, Y., Terada, Y., Imai, Y., Sawai, K., Knisely, C.W., Lubrication Tests to Support Optimal Performance Design Guidelines for Thrust Slide-Bearing in Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1497, (July 11-14, 2016).

120.      Ishii, N., Tsuji, T., Anami, K., Knisely, C.W., Kurihara, K., Oku, T., Sawai, K., Yoshida, H., Nakai, H., Optimization of EHL performance in Thrust Slide-Bearing of Scroll Compressors, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1565, (July 14-17, 2014).

119.      Ishii, N., Tsuji, T., Anami, K., Knisely, C.W., Oku, T., Nokiyama, K., Sawai, K., Yoshida, H., Nakai, H., Hydrodynamic-Pressure-Induced Elastic Deformation of Thrust Slide Bearing in Scroll Compressors and Oil Film Pressure Increase due to Oil Envelopment, Proceedings of International Compressor Engineering Conference at Purdue, Papaer No. 1562, (July 14-17, 2014).



118.      Tsuji, T., Ishii, N., Oku, T., Anami, K., Knisely, C.W., Nokiyama, K., Sawai, K., Morimoto, T. & Sakuta, A Study of Elasto-Hydrodynamic Lubrication Effect for Thrust-Slide bearings of Scroll Compressors (1st Report: Verification of Elastic Deformation by FEM Analysis and Experiments, and Oil Film Pressure Increase due to Oil Envelopment), Transactions of Japan Society of Mechanical Engineers, Series C, Vol. 79, No. 807, pp.4411-4423, (Nov. 2013).

117.      Tsuji, T., Ishii, N., Oku, T., Anami, K., Nokiyama, K., Knisely, C.W., Morimoto, T., Sakuda, A., Nakai, H., Sawai, K., An Experimental Study of Lubrication at Thrust Slide-Bearing of Scroll Compressors - Effect of Thickness and Inside Form of Thrust Plate -, Proc. of International Compressor Engineering Conference at Purdue, Paper No. 1439, 2012-7.

116.      Ishii, N., Tsuji, T., Oku, T., Anami, K., Knisely, C.W., Nokiyama, K., Morimoto, T., Sakuda, A., Sawai, K., Elasto-Hydrodynamic Lubrication Effect in Thrust-Slide Bearings of Scroll Compressors, Proc. of International Compressor Engineering Conference at Purdue, Paper No. 1438, 2012-7.

115.      Tsuji, T., Oku, T., Ishii, N., Anami, K., Knisely, C.W., Maeda, T., Yamamoto, A, Calculated Optimal Mechanical Efficiency of a Large Capacity Reciprocating Compressor, Proc. of International Compressor Engineering Conference at Purdue, Paper, No. 1443, 2012-7.

114.      Ishii, N., Tsuji, T., Anami, K., Matsui. A., Knicely C. W.: “Exploration of Optimally Efficient Super-large Cooling Capacity Scroll Compressors for Air Conditioners”, Proc. of ICR 2011, 945, Prague, Czech Republic, 2011-8.

113.      Tsuji, T., Ishii, N., Anami, K., Sawai K., Morimoto, T., Sakuda, A., Knisely C.: Exploration Study on the miniaturization of Optimally Efficient Scroll Compressors for Refrigerators, Proc. of ICR 2011, 943, Prague, Czech Republic, 2011-8.

112.      Oku, T., Tsuji, T., Ishii, N., Anami K., Ueda, S., Matsui, A., Knisely, C.:Development of Optimized Low-Pressure Ammonia Scroll Compressors with Maximum Efficiency, Proceedings of ICR 2011, 940, Prague, Czech Republic, 2011-8.

111.      Sawai, K., Hiwata, A., Sakuda, A., Iida, N., Morimoto, T., Ishii, N.:A Study of a New Oil Injection to Compression Chambers on Scroll Compressors, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1196, West Lafayette, Indiana, USA, 2010-7.

110.      Tsuji, T., Ishii, N., Anami, K., Sawai, K., Hiwata, A., Morimoto, T., Knisely, C.:Fundamental Optimal Performance Design Guidelines for Off-set Type Reciprocating Compressors to Maximize Mechanical Efficiency, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1358, West Lafayette, Indiana, USA, 2010-7.

109.      Tsuji, T., Ishii, N., Sawai, K., Anami, K., Hiwata, A., Morimoto, T., Sano, K., Knisely, C.:On the Development of Optimaly Efficient Compact Scroll Compressors for Refrigirators, Proc. of 2010 International Compressor Enginnering Conference at Purdue, 1357, West Lafayette, Indiana, USA, 2010-7.

108.      Ishii, N.: The Significance of Fundamental Academic Research in the Development of Super-Performance Compressors and Beyond (Plenary Speech at Purdue Conference in 2010), Proc. of 2010 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, 2010-7.

107.      Tsuji, T., Ishii, N.,Oku, T., Anami, K., Sawai, K., Morimoto, T., Iida, N.,Matsui, A., Knisely, C.: FUNDAMENTAL OPTIMAL DESIGN GUIDELINES FOR RECIPROCATING COMPRESSORS TO MAXIMIZE MIECHANICAL EFFICIENCY, Proceeding of 2009 International Institute of Refrigeration, Papiernicka, Slovakia, 2009-9, 2009-10.

106.      Sawai, K., Hiwata, A., Futagami, Y., Iida, N., Morimoto, T., Ishii, N.: Experimental Study of High Efficiency CO2 Scroll Compressor with a Control of Oil Flow to Compression Chamber, Trans. of the JSRAE Vol.26, No.4, 2009-6.

105.      Sawai, K., Hiwata, A., Sakuda, A., Iida, N., Morimoto, T.,Ishii, N.: Experimental Study of High Efficiency on R410A Scroll Compressor -2nd Report: Efficiency Improvement with New Oil Injection to Compression Chambers-, Trans. of the JSRAE Vol.26, No.4, 2009-4.

104.      Ishii, N., Oku, T., Anami, K., Tsuji, T., Ozasa, T., Sawai, K., Morimoto, T.,Iida, N. : An Experimental Study of Lubrication at Thrust Slide-Bearing of Scroll Compressors -Effect of thickness and inside Form of Thrust Plate-, Transactions of the JSRAE Vol.25, No.4, 2008-10.

103.      Yoshida, H., Sakurada, A., Futagami, Y., Morimoto, T., Ishii, N. : Clearance Control of Scroll Compressor for CO2 Refrigerant , Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, 2008-7.

102.      Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Fujiuchi, K. : Effects of Surface Roughness upon Gas Leakage Flow Through Small Clearances in CO2 Scroll Compressors,Proc. of 2008 International Compressor Engineering Conference at Purdue, 1429, West Lafayette, Indiana, USA, 2008-7.

101.      Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Optimal Performance Development of High-Pressure Type Ammonia Scroll Compressors for Maximum Efficiency, Proc. of 2008 International Compressor Engineering Conference at Purdue, 1425, West Lafayette, Indiana, USA, 2008-7.

100.      Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Optimal Performance Design Guidelines of Thrust Slide-Bering in Scroll Compressors for Maximum Efficiency,Proc. of 2008 International Compressor Engineering Conference at Purdue, 1428, West Lafayette, Indiana, USA, 2008-7.

099.      Ishii, N., Oku, T., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Iida, N. : Experimental Study of the Lubrication Mechanism for Thrust Slide Bearings in Scroll Compressors, HVAC&R Research Journal ASHRAE Vol.14, No.3, pp.453-465, 2008-5.

098.      Oku, T., Ishii, N., Anami, K., Knisely, C.W., Sawai, K., Morimoto, T., Hiwata, A. : Theoretical Model of Lubrication Mechanism in the Thrust Slide-Bearing of Scroll Compressors, HVAC&R Research Journal ASHRAE Vol.14, No.2, pp.239-358, 2008-3.

097.      Ishii, N., Oku, T., Matsui, A., Anami, K., C.W.Knisely., Sawai, K., Morimoto, T., Iida, N. : A study on the lubrication mechanism at thrust slide-bearing of scroll compressors, Proc. of International Conference on Compressors and their Systems , pp.513-524, London, UK, 2007-9.

096.      Ishii, N., Oku, T., Anami, K., Sawai, K., Sano, K., Morimoto, T. : Evaluation Method of Gas Leakage Flow Through Small Clearances in CO2 Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.273-280, 2007-9.

095.      Sawai, K., Sakuda, A., Iida, N., Hiwata, A., Morimoto, T., Ishii, N. : Experimental Study on Efficiency Improvement of R410A Scroll Compressor for Air Conditioner -1st Report:Performance Improvement by Oil-injection into Compression Chamber-, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.265-272, 2007-9.

094.      Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Iida, N. : An Optimal Performance Design on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.3, pp.253-264, 2007-9.

093.      Sawai, K., Sakuda, A., Iida, N., Hiwata, A., Morimoto, T., Ishii, N., : Experimental Study on Efficiency Improvement of R410A Scroll Compressor for Air Conditioner - 1st Report : Performance Improvement by Oil-injection into Compression Chamber -, Trans. of the JSRAE Vol.24, No.3, pp265-272, 2007-4

092.      Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Hiwata, A. : A Theoretical Development on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.1, pp77-88, 2007-3.

091.      Oku, T., Ishii, N., Anami, K., Sawai, K., Morimoto, T., Hiwata, A. : An Experimental Study on Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors, Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers Vol.24, No.1, pp.65-75, 2007-3.

090.      Nakamoto, T., Sakuda, A., Sawai, K., Iida, N., Ishii, N. : DEVELOPMENT OF AIR PUMP FOR FUEL CELLS, Proc. of International Compressor Engineering Conference at Purdue, C158, West Lafayette, IN, USA, 2006-7.

089.      Hiwata, A., Futagami, Y., Morimoto, T., Murakami, H., Ishii, N. : DEFORMATION CONTROL OF SCROLL COMPRESSOR FOR CO2 REFRIGERANT, Proc. of International Compressor Engineering Conference at Purdue, C140, West Lafayette, IN, USA, 2006-7.

088.      Oku, T., Anami, K., Ishii, N., Knisely, C.W., Sawai, K., Morimot, T., Hiwata, A. : Optimal Performance Design Method of Thrust Slide-Bearing in Scroll Compressors for Its Best Efficiency, Proc. of International Compressor Engineering Conference at Purdue, C128, West Lafayette, IN, USA, 2006-7.

087.      Oku, T., Anami, K., Ishii, N., Knisely, C.W., Sawai, K., Aya, T., Iida, N. : Leakage Tests of Wet CO2 Gas with Oil-Mixture in Scroll Compressors and Its Use in Simulations of Optimal Performance, Proc. of International Compressor Engineering Conference at Purdue, C127, West Lafayette, IN, USA, 2006-7.

086.      Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T., Hiwata, A. : BASIC STUDY OF GAS LEAKAGE FLOW THROUGH SMALL CLEARANCES IN SCROLL COMPRESSORS(Effect of surface roughness),Proceedings of the 2005 JSRAE Annual Conference, ISSN 0285-6867, C312, 2005-10.

085.      Oku, T., Ishii, N., Anami, K., Sawai, K., Iida, N., Morimot, T., Hiwata, A. : ESTABLISHMENT OF OPTIMAL DESIGN METHOD OF LUBRICATION AT THRUST SLIDE-BEARING OF SCROLL COMPRESSORS (Basic Theoretical Analysis), Proceedings of the 2005 JSRAE Annual Conference, ISSN 0285-6867, C308, 2005-10.

084.      Oku, T., Ishii, N., Anami, K., Sano, T., Sawai, T., Morimoto, T., Hiwata, A. : AnExperimental Study of Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors(Examination of Friction Area and Thrust Force), Mechanical Engineering Congress, 2005 Japan , Vol4 pp299-300,2005-9.

083.      Sawai, K., Sakuda, A., Nakamoto, T., Iida, N., Tsujimoto, T., Hukuhara, H., Murakami, H., Nagata, T., and Ishii, N. : Development of small size air compressor for mobile fuel cells,Proc. of 2005 International Conference On Compressors And Their Systems 2005,(London, UK),pp.109-117,2005-9.

082.      Oku, T., Ishii, N., Anami, K., Knisely, C.W., Yasuda, K., Sawai, K., Sano, K. and Morimoto, T. : Gas Leakage in CO2 Scroll Compressors and Its Use in Simurations of Oprimal Performance, International Conference On Compressors And Their Systems, pp.403-412, London, UK, 2005-9.

081.      Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T., Sano, K. : Theoretical Calculations of Lubrication at Thrust Slide-Bearing of Scroll Compressors for Its Optimal Performance, The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.

080.      Oku, T., Ishii, N., Anami, K., Yasuda, K., Sawai, K., Iida, N., Morimoto, T. : Basic Study of Gas Leakage flow through Small Clearances in Scroll Compressors(Effect of Surface Roughness), The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.

079.      Anami, K., Ishii, N., Oku, T., Takatomi, Y., Ohara, T., Sakamoto, H. : Experimental Study of Flow-Rate Variation Pressure on Tainter Gates, The Japan Society of Mechanical Engineers Kanto-Block Conference, 2005-9.

078.      Oku, T.,Anami, K.,Ishii, N.,Yasuda, K.,Sawai, K.,Sano, K.,Morimoto, T., : BASIC RESEARCH OF GAS LEAKAGE FLOW THROUGH SMALL CLEARANCES IN CO2 SCROLL COMPRESSORS, Proceding of the 2004 JSRAE Annual Conference, D206.1-4, Hamamatsu, Japan, 2004-10.

077.      Oku, T., Anami, K., Ishii, N., Sano, K.: Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors (Theoretical Study), Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C104 (CD-ROM), 2004-7.

076.      Ishii, N., Oku, T., Anami, K., Fukuda, A.: Lubrication Mechanism at Thrust Slide-Bearing of Scroll Compressors (Experimental Study), Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C103 (CD-ROM), 2004-7.

075.      >Yoshida, H., Kawano, H., Morimoto, T., Ishii, N.: Improvement of R410 Scroll Compressor Efficiency by Reduction of Leakage Loss, Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C094 (CD-ROM), 2004-7.

074.      Hiwata, A., Futagami, Y., Morimoto, T., Ishii, N.: New Thrust Bearing Groove to Control the for CO2 Scroll Compressor without Accumulators, Proc. of 2004 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C078 (CD-ROM), 2004-7.

073.      Ishii, N., Kawamura, S., Yamamoto, S., Sawai, K., Hiwata, A., Nakamoto, T., Kawano, H. and Ting, K.S.: Efficiency Simulations with Consideration of Heat Losses of R410 Compact Scroll Compressor for Its Optimal Performance, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C22-3 (CD-ROM), 2002-7.

072.      Ishii, N., Yamamoto, S., Sano, K., Sawai, K., Hiwata, A., Nakamoto, T. and Kawano, H.: Efficiency Simulations of a Compact CO2 Scroll Compressor and Its Comparison with Same Cooling Capacity R410A Scroll Compressor, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C22-2 (CD-ROM), 2002-7.

071.      Hiwata, A., Iida, N., Futagami, Y., Sawai, K. and Ishii, N.: Performance Investigation with Oil-Injection to Compression Chambers on CO2-Scroll Compressor, Proc. of 2002 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, C18-4 (CD-ROM), 2002-7.

070.      Sakuda, A., Sawai, K., Lida, N., Hiwata, A., Morimoto, T. and Ishii, N.: Performance improvement of scroll compressor with new sealing-oil supply mechanism, IMechE Conference Transactions of International conference on Compressors and their Systems, London, UK, 2001-9.

069.      Ishii, N., Morita, N., Kurimoto, M., Yamamoto, S. and Sano, K.: Calculations for Compression Efficiency Caused by Heat Transfer in Compact Rotary Compressors, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.467-474, 2000-7.

068.      Ishii, N., Morita, N., Ono, M., Yamamoto, S. and Sano, K.: Net Efficiency Simulations of Compact Rotary Compressors for Its Optimal Performance, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.475-482, 2000-7.

067.      Sawai, K., Iida, N., Hasegawa, H. and Ishii, N.: Dynamic Analysis of New Volumetric Compressor with Rotating Cylinder and Piston, Proceedings of 2000 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.777-784, 2000-7.

066.      Sawai, K., Iida, N., Futagami, Y.,Hirano, H., Hasagawa, H. and Ishii, N.: Development of new volumetric compressor with rotating cylinder and piston, Proceedings of 1999 International Conference on Compressors and Their Systems, London, UK, pp.609-616, 1999-9.

065.      Ishii, N., Hitotsubashi, M., Yamamoto, S., Matsunaga, H., Hashimoto, T. and Sano, K.: Volumetric Similarity for Vibrations of Reed Valve in Refrigerant Compressors, Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.99-104, 1998-7.

064.      Kohayakawa, T., Yamamoto, S., Sawai, K., Hase, S., Morimoto, T., Ashitani, H. and Ishii, N.: Performance Evaluation of Horizontal Type Scroll Compressor for Alternative Refrigerant (R410A), Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.435-440, 1998-7.

063.      Ishii, N., Bird, K., Yamamoto, S., Matsunaga, H., Sano, K. and Hayashi, M.: A Fundamental Optimum Design for High Mechanical and Volumetric Efficiency of Compact Rotary Compressors, Proceedings of 1998 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.649-654, 1998-7.

062.      Sano, K., Kawahara, S., Fujiwara, N. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (1st Report: Reduction of Noises caused by Resonance of each Scroll Compressor Element), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.125-136, 1997.

061.      Sano, K., Kawahara, S., Fujiwara, N. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (2nd Report: Noises due to Cavity Resonance in Various Compressor Spaces), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.137-148, 1997.

060.      Sano, K., Kawahara, S., Akazawa, T. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (3rd Report: Electro-magnetic Noise for Inverter Driven Compressor), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.2, pp.149-158, 1997.

059.      Sano, K., Kawahara, S., Akazawa, T. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (4th Report: Compressor Vibrations and their Transfer Control), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.3, pp.233-243, 1997.

058.      Sano, K. and Ishii, N.: Experimental Study for Reduction of Noises and Vibrations in Hermetic Type Compressor (5th Report: Enclosure Construction for Compressor), Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, Vol.14 No.3, pp.245-253, 1997.

057.      Moriya, Y. and Ishii, N.: Humidity Control System with Adsorption Materials, JSME International Journal, Series B, Vol.39, No.3, pp.653-659, 1996-8.

056.      Moriya, Y. and Ishii, N. : Humidity Control System with Adsorption Materials, JSME International Journal, Series B, Vol.39, No.3, pp.653-659, 1996-8.

055.      Moriya, Y., Oyama, M. and Ishii, N.: A Humidifier for Automobile with an Adsorption and Interior Air Quality Improvement, Proceedings of the 7th International Conference on Indoor Air Quality and Climate (Nagoya), Vol.3, pp.465-470, 1996-7.

054.      Moriya, Y., Shirai, Y., Hara, M. and Ishii, N.: An Unvented Space Heater with a Low NOx and CO level Combustor, Proceedings of the 7th International Conference on Indoor Air Quality and Climate (Nagoya), Vol.3, pp.483-488, 1996-7.

053.      Hase, S., Yamamoto, S., Hirano,H., Kohayakawa, T., Kawano H., Futagami, Y., Oka, H. and Ishii, N.: Development of a Compact Horizontal-Type Scroll Compressor for Alternative Refrigerants, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.303-309, 1996-7.

052.      Morimoto, T., Yamamoto, S., Hase, S., Yamada, S. and Ishii, N.: Development of a High SEER Scroll Compressor, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.I, pp.317-322, 1996-7.

051.      Ishii, N., Bird, K., Sano K., Oono, M., Iwamura S. and Otukura T.: Refrigerant Leakage Flow Evaluation for Scroll Compressors, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.633-638, 1996-7.

050.      Ishii, N., Sakai, M., Sano, K., Yamamoto S. and Otokura T.: A Fundamental Optimum Design for High Mechanical and Volumetric Efficiency of Compact Scroll Compressors, Proceedings of 1996 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.II, pp.639-644, 1996-7.

049.      Ishii, N., Knisely, C.W. and Nakata, A.: Field Study of A Long-Span Shell-Type Gate Undergoing Flow-Induced Vibrations, Journal of Fluid and Structures, Vol.9, No.1, pp.19-41, 1995-1.

048.      Moriya, Y. and Ishii, N.: A Humidity Control System with an Adsorption Material and Indoor Air Quality Improvement, Transactions of the Japan Association of Refrigerating, Vol.11, No.3, p.371-381, 1994.

047.      Yanagida, N., Moriya, Y. and Ishii, N.: Studies on Indoor Air Quality by Using Adsorption Characteristics of the Desiccant, Proceedings of 12th International Symposium on Contamination Control, p.243-248, 1994-10.

046.      Moriya, Y., Ishii, N. and Shirai, Y.: Development and Experimental Studies of a Fan-Assisted Room Heater with a Low NOx and CO Level Burner, Proceedings of 12th International Symposium on Contamination Control, p.289-294, 1994-10.

045.      Moriya, Y., Ishii, N. and Yamada, K.: NOx Formation Behavior Affecting the Prediction of Indoor Concentration, Proceedings of 12th International Symposium on Contamination Control, p.301-306, 1994-10.

044.      Moriya, Y. and Ishii, N.: An Evaluation of the Adsorption Humidity Control on Indoor Air Quality, Proceedings of the 3rd International Conference of '94 Healthy Building, p.129-134(vol.1), 1994-8.

043.      Moriya, Y. and Ishii, N.: Development and Experimental Studies of an Unvented Space Heater with a Low NOx and CO Level Burner, Proceedings of the 3rd International Conference of '94 Healthy Building, p.121-126(vol.2), 1994-8.

042.      Ishii, N., Yamamura, M., Muramatsu, S., Yamada, S. and Takahashi, M.: A Study on High Mechanical Efficiency of a Scroll Compressor with Fixed Cylinder Diameter, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.677-682, 1994-7.

041.      Hase, S., Sano, K., Yamamoto, S., Hirano, H., Kobayakawa, T. and Ishii, N.: Development of the High-Efficiency Horizontal-Type Scroll Compressor, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.447-452, 1994-7.

040.      Ishii, N., Fukushima, M., Muramatsu, S., Matsunaga, H. and Nakazumi, K.: Self-Excitation Mechanism of Reed Valve in Refrigerant Compressors, Proceedings of 1994 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.2, pp.785-790, 1994-7.

039.      Ishii, N. and Ymamoto, S.: Fundamental Design for Optimization of A Scroll Compressor, Turbomachinery, 21-12, pp.729-733, 1993-8 (in Japanese).

038.      Sawai, K. and Ishii, N.: Performance and Reliability Improvement Technologies for A Small Cooling Capacity Scroll Compressor for Air Conditioners, Turbomachinery, 21-12, pp.746-751, 1993-7.

037.      Moriya, Y., Ishii, N. and Yanagida, N.: Development and Experimental Studies of an Adsorption Humidity Control Apparatus for Residential Application, Indoor Air'93, the 6th International Conference on Indoor Air Quality and Climate, p.443-448, 1993-7.

036.      Sawai, K., Murayama, M., Kozima, Y., Yamamoto, S., Kawahara, S., Sakai, M., Tubokawa, M. and Ishii, N.: A Compact Horizontal Scroll-Type Compressor for Room Air Conditioners, Trans . (JAR), Vol.10, No.3, pp.511-517, 1993-5.

035.      Ishii, N., Fukuoka, H., Matsunaga, H., Fukushima, M. and Nakazumi, K.: Dynamic Stability Criterion for Reed Valves in Refrigerant Compressors, JSME International Journal, Ser.C, Vol.36, No.1, pp.69-76, 1993-3.

034.      Ishii, N., Ymamoto, S., Ymamura, M., Takahashi, M., and Muramatsu. S.: A Study for High Mechanical Efficiency of A Scroll Compressor with Fixed Cylinder Diameter and Suction Volume, Turbomachinery, 21-10, pp.585-593, 1993-3.

033.      Ishii, N., Yamamoto, S., Muramatsu, S., Yamamura, M. and Takahashi, M.: Optimum Combination of Parameters for High Mechanical Efficiency of a Scroll Compressor, Proceedings of 1992 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, pp.118a1-118a8, 1992-7.

032.      Sawai, K., Yamamura, M., Kojima, Y., Yamamoto, S., Kawahara, S., Sakai, M., Tsubokawa, M. and Ishii, N.: A Compact Horizontal Scroll-Type Compressor for Room Air Conditioners, Proceedings of 1992 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.569-575, 1992-7.

031.      Yamamura, M., Muramatsu, S., Kojima, Y., Yamamoto, S., Kawahara, S. and Ishii, N.: Compact Type Scroll Compressor for Air Conditioners, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.140-146, 1990-7.

030.      Ishii, N., Yamamura, M., Muramatsu, S., Yamamoto, S. and Sakai, M.: Mechanical Efficiency of a Variable Speed Scroll Compressor, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.192-199, 1990-7.

029.      Ishii, N., Abe, Y., Taguchi, T., Maruyama, T. and Kitamura, T.: Dynamic Behavior of Variable Displacement Wobble Plate Compressor for Automotive Air Conditioners, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.345-353, 1990-7.

028.      Ishii, N., Fukushima, M., Yamamura, M., Fujiwara, S. and Kakita, S.: Optimum Combination of Dimensions for High Mechanical Efficiency of a Rolling-Piston Rotary Compressor, Proceedings of 1990 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.418-424, 1990-7.

027.      Ishii, N., Yamamura, M., Morokoshi, H., Fukusima, M., Yamamoto, S. and Sakai, M.: Dynamic Characteristics of a Variable Scroll Compressor (1st Report, Dynamic Behavior), Transactions of the Japan Society of Mechanical Engineers, Series C, 55-517, pp.2436-2445, 1989-9.

026.      Ishii, N., Fukushima, M., Yamamura, M., Muramatsu, S., Sano, K. and Sakai, M.: The High Mechanical Efficiency of Rolling-Piston Rotary Compressors, Proceedings of the 2nd World Congress on Heating, Ventilating, Refrigeration and Air Conditioning(CLIMA2000), Sarajero, Yugoslavia, pp.91-96, 1989-8.

025.      Ishii, N., Fukusima, M., Yamamura, M., Muramatu, S., Sano, K. and Sakai, M.: The High Mechanical Effciency of Rolling-Piston Rotary Compressors (2nd Report, Theoretical Study), Transactions of the Japan Society of Mechanical Engineers, Series C, 55-511, pp.687-695, 1989-3.

024.      Ishii, N., Yamamura, M., Muramatu, S., Fukushima, M., Sano, K. and Sakai, M.: The High Mechanical Effciency of Rolling-Piston Rotary Compressors (1st Report, Experimental Study), Transactions of the Japan Society of Mechanical Engineers, Series C, 54-507, pp.2578-2582, 88.

023.      Ishii, N., Fukushima, M., Sawai, K., Sano, K. and Imaichi, K.: Dynamic Behavior of a Scroll Compressor (Dynamic Analysis), JSME International Journal, Series 3, Vol.31, No.1, pp.58-67, 1988.

022.      Ishii, N., Yamamura, M., Fukushima, M., Murozono, K. and Sakai, M.: Dynamic Behavior of a Slider-Crank Drive Stirling Machine, Proceedings of 4th International Conference on Stirling Engines, Tokyo, pp.93-98, 1988-11.

021.      Ishii, N., Yamamura, M., Morokoshi, H., Fukushima, M., Yamamoto, S. and Sakai, M.: On the Superior Dynamic Behavior of a Variable Rotating Speed Scroll Compressor, Proceedings of 1988 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.1, pp.75-82, 1988-7..

020.      Ishii, N., Yamamura, M., Morokoshi, H., Muramatsu, S., Sawai, K., Osaka, M., Yamamura, M.: Mechanical Efficiency of Various Large Capacity Scroll Compressors, Proceedings of 17th International Congress of Refrigeration, Wien Austria, pp.468-474, 1987.

019.      Ishii, N., Ymamura, M., Morokoshi, H., Muramatsu, S., Sawai, K. and Ymamuka, M:, Mechanicai Efficiency of Various Large Capacity Scroll Compressors, Transactions of the Japan Society of Mechanical Engineers, Series C, 53-495, Series C, 53-495, pp.2295-2302, 1987-11.

018.      Ishii, N., Fukushima, M., Sawai, K., Sano, K. and Imaichi, K.: Dynamic Behavior of a Scroll Compressor (Dynamic Analysis) , Transactions of the Japan Society of Mechanical Engineers, Series C, 53-491, pp.1368-1376, 1987-7.

017.      Ishii, N., Fukushima, M., Sano, K. and Sawai, K.: A Study on Dynamic Behavior of A Scroll Compressor, Proceedings of 1986 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, Vol.III, pp.901-916, 1986-8.

016.      Imaichi, K., Ishii, N., Muramatsu, S., Fukushima, M. and Matsunaga, H.: Relation between Vibratoins and Crankshaft Rotatory Behavior of a Rolling-Piston Rotary Compressor When It Stops. Transactions of the Japan Society of Mechanical Engineers, Series C, 51-469, pp.2213-2223, 1985-9.

015.      Ishii, N., Naudascher, E. and Imaichi, K.: Reservoir Depth Effects upon Hydrodynamic Loading of Tainter-Gates, Proceedings of EUROMECH 188, pp.56-57, 1984-9.

014.      Ishii, N., Imaichi, K., Muramatsu, S., Fukushima, M. and Matsunaga, H.: The Study of Rolling Piston, Rotary Compressor Dynamic Behavior When Stopping to Reduce Noise and Vibration Level, Proceedings of 1984 International Compressor Engineering Conference at Purdue, West Lafayette, Indiana, USA, pp.1-8, 1984-7.

013.      Imaichi, K., Ishii, N., Imasu, K., Muramatsu, S. and Fukushima, M.: A Vibration Source in Refrigerant Compressors, Transactions of the ASME, Journal of Vibrations, Stress, Reliability and Design, Vol.106, pp.122-128, 1984-1.

012.      Ishii, N., Imaichi, K., Muramatsu, S. and Fukushima, M.: A Computer Simulation of Higher Frequency Vibrations of A Reciprocating Compressors, Proceedings of 16th International Congress of Refrigeration, pp.418-423, 1983.

011.      Imaichi, K., Fukushima, M., Muramatsu, S. and Ishii, N.: Vibration Analysis of Rotary Compressors. Transactions of the Japan Society of Mrchanical Engineers, Series C, 49-447, pp.1959-1970, 1983-11.

010.      Imaichi, K., Fukushima, M., Muramatsu, S. and Ishii, N.: Vibration Analysis of Rotary Compressors, Proceedings of the 1982 Purdue International Compressor Engineering Conference, pp.275-282, 1982-7.

009.      Imaichi, K., Ishii, N. and Imasu, K.: A Vibration Source in Refrigerant Compressors, Design Engineering Technical Conference, ASME, pp.1-8, 1981-6.

008.      Imaichi, K., Ishii, N., Imasu, K., Muramatsu, S. and Fukushima, M.: High Frequency Vibratory Components Caused by Elastic Vibrations of the Crankshaft in Refrigerating Compressors, Proceedings of the 1980 Purdue International Compressor Engineering Conference, pp.90-96, 1980-7.

007.      Imaichi, K., Ishii, N., Imasu, K., Muramatu, S. and Fukusima, M.: High Frequency Vibratory Components Caused by Elastic Vibrations of the Crank Shaft in Refrigerating Compressors, Refrigeratoin(JAR), 55-636, pp.851-857, 1980-5.

006.      Imaichi, K. and Ishii, N.: A Device for Silently Stopping Single-Cylinder Reciprocating Compressors, with Almost No Vibrations, International Congress of refrigeration in Venezia, p.23 ,1979.

005.      Imaichi, K., Ishii, N., Imasu, K. and Murai, M.: A Device for Stopping Single-Cylinder Reciprocating Compressors Silently by Greatly Reducing Vibrations, Proceedings of 15th International Congress of Refrigeration, Vol.II, pp.727-733, 1979.

004.      Imaichi, K., Ishii, N., Saito, S. and Imasu, K.: Leakage Effects on Indicator Diagrams at Stopping of Reciprocating Compressors, Proceedings of Purdue Compressor, Technology Conference, pp.283-288, 1978-7.

003.      Imaichi, K., Ishii, N., Murai, M. and Imasu, K.: Dynamic Stop Behavior of a Small Reciprocating Compressor, Transactions of the Japan Society of Mechanical Engineers, 42-364, pp.3842-3852, 1976-12.

002.      Ishii, N., Imaichi, K., Kagoroku, N. and Imasu, K.: Vibrations of a Small Reciprocating Compressor, Design Engineering Technical Conference, Washington, D.C, ASME, pp.1-12, 1975-9.

001.      Imaichi, K., Ishii, N. and Kagoroku, N.: Vibrations of a Small Reciprocating Compressor, Transactions of the Japan Society of Mechanical Engineers, 41-348, pp.2333-2346, 1975-8.

 
back